Arachna Bracelet is a design made by @ashaarundhati on Instagram, but I believe she/he has changed her name already. Named and tutorial by Abby @expertlooms on Instagram, the pretty lady who also make my Fukku design tutorial. For this one Rainbow Loom is set in a parallel format, uses 3 pin bars only. The design is quite tight because of the unusual band placement and looping. I recommend stretchy bands to use for this design. Nevertheless, the bracelet is still pretty as any other designs. With a little pulling after taking it off the loom and it is good to go! I also recommend this for beginner loomers to try and make.
I made mine in official rainbow loom bands in Jelly Teal and Yellow and Opaque Black and White all from Mixed with Jelly Pack.
Here is a picture of the Arachna Bracelet that I made.
What you’ll be needing to make this bracelet:
1. Rainbow Loom – you will need just one loom with 3 pin bars in parallel set-up. If you use 1 loom, you will still be needing a bracelet extension. For a full wrap bracelet, you can use 1 and half long or 2 looms or 6 pin bars.
2. Rainbow loom hook.
3. Set of bands – As any other bracelets we can also experiment colors for this design. You will only need approximately 75 bands to make this bracelet on 1 loom with extension and a little or over a 130 for a full wrap or 1 an 1/2 looms length. I used 4 different colors for my sample in this post.
4. A c-clip. You can use a clear one or the new colored ones. I use the regular clear c-clip in this post.
Here in this picture of the loom set-up before it is looped.
To make this Arachna Bracelet, you can watch this video:
Here are some more of the picture for Arachna Bracelet. Tell me your thoughts by commenting down below.
Signature side when worn
Reverse side when worn
If you found this article helpful, please don’t forget to share, and you’ll make me smile forever! Thank you so much!